9 liens privés
Improved version of my leaf separator to keep downpipes clean and clog-free. Versus V1: easier printing, better separation, simpler installation.HighlightsMostly support-free printing — only the main body needs minimal support at the very start.Fits DN100, DN90, DN85, DN75, DN70 downpipes.Quick clamp assembly — main body locks to top/bottom adapter with 1× M4 screw + nut.Much better separation of leaves, moss, and debris with a lower clogging risk.STEP bases included: TopBase.step and BottomBase.step for custom sizes.Material: PETG recommended for outdoor use (water & UV resistant). ASA (better UV resistance) is possible but more sensitive to overhangs.Modular system Build your stack like this:Top adapter (choose DN size)Main body with sieve, either with 30 mm water outlet or notOptional modulesBasket holder to catch leaves/debris — mounts directly under the main body.Rain-collector module with 30 mm hose outlet — mounts under the main body (and below the basket holder if used).Bottom adapter (choose DN size)VariantsStandard: Main body without outlet; optionally add basket holder and/or rain-collector module.Direct outlet: Main body with integrated 30 mm outlet.DimensionsMain bodyWithout adapter: H 230 mmWith direct outlet: H 241 mm, outlet Ø 30 mm (OD)Optional ModulesBasket Holder: H 37 mm, Basket L: H 220 mm, Ø 230 mmBasket M: H 180mm, 160 mm x 180 mmRain collector: H 86 mm, Ø 130 mm, outlet Ø 30 mm (OD) AdaptersDN100 bottom: H 30 mm, Ø outside 96 mm || top: H 28 mm, Ø inside 101 mmDN90 bottom: H 30 mm, Ø outside 96 mm || top: H 33 mm, Ø inside 92 mmDN85 bottom: H 40 mm, Ø outside 81 mm || top: H 35 mm, Ø inside 87 mmDN80 bottom: H 45 mm, Ø outside 76 mm || top: H 40 mm, Ø inside 82 mmDN75 bottom: H 45 mm, Ø outside 71 mm || top: H 40 mm, Ø inside 77 mmDN70 bottom: H 45 mm, Ø outside 66 mm || top: H 45 mm, Ø inside 72 mm Note: All *.STL files can be found in the 3MF file!
